Material density detection system used to create wet wipes with Arduino 2/2

Imagen
Construction of the final prototype Components used The components used have been, per module: Density Bar 1 - Arduino Pro Mini 5v 4 - LDRs 4 - Resistors 1k 2 - PCB Terminal Blocks Communication bar 1 - Arduino Pro Mini 5v 1 - LM2596s DC-DC step down power supply module 2 - PCB Terminal Blocks 1 - Voltage regulator TIP220 1 - Heat Sink for TIP220 1 - Rectangular LED 6W 630lm 6500K COB 170 x 15 mm. Industruino 1 - Industruino PROTO kit 1 - Relay module Keyes_SR1 Arduino with screen 1 - Arduino UNO R3 1 - 16x2 Character LCD module with I2C 3 - Resistors 10k 2 - Resistors 220 1 - LED Red 1 - LED Green 3 - Buttons 1 - Relay module Keyes_SR1 Assembly of the circuit The Fritzing scheme is as follows: Density bar Circuit that manages the density bar This circuit is responsible for obtaining the measurements and send notifications to the communications bar for redirection. Communication bar Circuit that manages the c...
1 comentario

Instalación y primeros pasos con Haroopress


Como dicen en su github:
 A static site generator built with Node.js, "Haroo" means "a day" Support Markdown presentation, Syntax Highlight, Themes
Es un generador de páginas web estátias hecho con Node.js.
Su uso se vuelve un poco complicado al principio, ya que su web y el site por defecto que este crea están en idioma coreano.

Instalación requisitos previos:

Los requerimientos prévios para la instalación son los siguientes:

Node.js

yum install nodejs

Git

yum install git

Instalación

Los pasos que he seguido para la instalación han sido los siguientes:

Obtención del programa:

Los comandos ejecutados han sido:
mkdir haroopress_test
git clone https://github.com/rhiokim/haroopress.git haroopress_test
El resultado por pantalla ha sido
Cloning into 'haroopress_test'...
remote: Counting objects: 6758, done.
remote: Total 6758 (delta 0), reused 0 (delta 0), pack-reused 6758
Receiving objects: 100% (6758/6758), 22.34 MiB | 941.00 KiB/s, done.
Resolving deltas: 100% (2821/2821), done.
Checking connectivity... done.

Inicialización del sitio web:

Los comandos ejecutados han sido:
cd haroopress_test

git config --global user.email "email"
git config --global user.name "username"

sudo make init
La ejecución del comando anterior da como resultado la siguiente salida por pantalla, en la cual se nos pide información básica sobre la web a generar.
npm install -g node-gyp
npm http GET https://registry.npmjs.org/node-gyp
npm http 304 https://registry.npmjs.org/node-gyp
npm http GET https://registry.npmjs.org/graceful-fs
npm http GET https://registry.npmjs.org/minimatch
npm http GET https://registry.npmjs.org/mkdirp
npm http GET https://registry.npmjs.org/nopt
npm http GET https://registry.npmjs.org/npmlog
npm http GET https://registry.npmjs.org/tar
npm http GET https://registry.npmjs.org/fstream
npm http GET https://registry.npmjs.org/osenv
npm http GET https://registry.npmjs.org/rimraf
npm http GET https://registry.npmjs.org/which
npm http GET https://registry.npmjs.org/request
npm http GET https://registry.npmjs.org/glob
npm http GET https://registry.npmjs.org/semver
npm http 304 https://registry.npmjs.org/graceful-fs
npm http 304 https://registry.npmjs.org/npmlog
npm http 200 https://registry.npmjs.org/mkdirp
npm http 304 https://registry.npmjs.org/tar
npm http 200 https://registry.npmjs.org/nopt
npm http 304 https://registry.npmjs.org/fstream
npm http 304 https://registry.npmjs.org/osenv
npm http 200 https://registry.npmjs.org/minimatch
npm http 304 https://registry.npmjs.org/which
npm http 200 https://registry.npmjs.org/rimraf
npm http 200 https://registry.npmjs.org/semver
npm http 200 https://registry.npmjs.org/glob
npm http GET https://registry.npmjs.org/rimraf/-/rimraf-2.3.3.tgz
npm http GET https://registry.npmjs.org/semver/-/semver-4.3.4.tgz
npm http 200 https://registry.npmjs.org/request
npm http 200 https://registry.npmjs.org/rimraf/-/rimraf-2.3.3.tgz
npm http 200 https://registry.npmjs.org/semver/-/semver-4.3.4.tgz
npm http GET https://registry.npmjs.org/abbrev
npm http GET https://registry.npmjs.org/inflight
npm http GET https://registry.npmjs.org/once
npm http GET https://registry.npmjs.org/inherits
npm http GET https://registry.npmjs.org/minimatch/-/minimatch-2.0.7.tgz
npm http GET https://registry.npmjs.org/gauge
npm http GET https://registry.npmjs.org/ansi
npm http GET https://registry.npmjs.org/are-we-there-yet
npm http GET https://registry.npmjs.org/lru-cache
npm http GET https://registry.npmjs.org/sigmund
npm http GET https://registry.npmjs.org/minimist/0.0.8
npm http 304 https://registry.npmjs.org/abbrev
npm http 200 https://registry.npmjs.org/once
npm http 304 https://registry.npmjs.org/ansi
npm http 200 https://registry.npmjs.org/inflight
npm http 200 https://registry.npmjs.org/inherits
npm http GET https://registry.npmjs.org/inherits
npm http 304 https://registry.npmjs.org/are-we-there-yet
npm http GET https://registry.npmjs.org/once/-/once-1.3.2.tgz
npm http 200 https://registry.npmjs.org/sigmund
npm http 200 https://registry.npmjs.org/minimatch/-/minimatch-2.0.7.tgz
npm http 200 https://registry.npmjs.org/minimist/0.0.8
npm http 304 https://registry.npmjs.org/gauge
npm http 200 https://registry.npmjs.org/inherits
npm http GET https://registry.npmjs.org/minimist/-/minimist-0.0.8.tgz
npm http 200 https://registry.npmjs.org/once/-/once-1.3.2.tgz
npm http GET https://registry.npmjs.org/delegates
npm http 200 https://registry.npmjs.org/minimist/-/minimist-0.0.8.tgz
npm http GET https://registry.npmjs.org/readable-stream
npm http 200 https://registry.npmjs.org/lru-cache
npm http GET https://registry.npmjs.org/block-stream
npm http GET https://registry.npmjs.org/forever-agent
npm http GET https://registry.npmjs.org/form-data
npm http GET https://registry.npmjs.org/json-stringify-safe
npm http GET https://registry.npmjs.org/mime-types
npm http GET https://registry.npmjs.org/node-uuid
npm http GET https://registry.npmjs.org/qs
npm http GET https://registry.npmjs.org/tunnel-agent
npm http GET https://registry.npmjs.org/oauth-sign
npm http GET https://registry.npmjs.org/tough-cookie
npm http GET https://registry.npmjs.org/http-signature
npm http GET https://registry.npmjs.org/aws-sign2
npm http GET https://registry.npmjs.org/hawk
npm http GET https://registry.npmjs.org/stringstream
npm http GET https://registry.npmjs.org/combined-stream
npm http GET https://registry.npmjs.org/isstream
npm http GET https://registry.npmjs.org/har-validator
npm http GET https://registry.npmjs.org/caseless
npm http GET https://registry.npmjs.org/bl
npm http GET https://registry.npmjs.org/lru-cache/-/lru-cache-2.6.2.tgz
npm http GET https://registry.npmjs.org/lodash.pad
npm http GET https://registry.npmjs.org/lodash.padleft
npm http GET https://registry.npmjs.org/lodash.padright
npm http GET https://registry.npmjs.org/has-unicode
npm http 304 https://registry.npmjs.org/delegates
npm http 304 https://registry.npmjs.org/block-stream
npm http 304 https://registry.npmjs.org/json-stringify-safe
npm http GET https://registry.npmjs.org/wrappy
npm http 200 https://registry.npmjs.org/readable-stream
npm http 304 https://registry.npmjs.org/forever-agent
npm http 200 https://registry.npmjs.org/form-data
npm http 200 https://registry.npmjs.org/mime-types
npm http 200 https://registry.npmjs.org/node-uuid
npm http 200 https://registry.npmjs.org/tunnel-agent
npm http 200 https://registry.npmjs.org/lru-cache/-/lru-cache-2.6.2.tgz
npm http 304 https://registry.npmjs.org/oauth-sign
npm http 200 https://registry.npmjs.org/qs
npm http 304 https://registry.npmjs.org/http-signature
npm http 304 https://registry.npmjs.org/aws-sign2
npm http 304 https://registry.npmjs.org/hawk
npm http 304 https://registry.npmjs.org/stringstream
npm http 200 https://registry.npmjs.org/tough-cookie
npm http 200 https://registry.npmjs.org/combined-stream
npm http 304 https://registry.npmjs.org/isstream
npm http 304 https://registry.npmjs.org/caseless
npm http GET https://registry.npmjs.org/mime-types/-/mime-types-2.0.11.tgz
npm http 200 https://registry.npmjs.org/har-validator
npm http 304 https://registry.npmjs.org/lodash.pad
npm http 200 https://registry.npmjs.org/lodash.padright
npm http 200 https://registry.npmjs.org/bl
npm http 304 https://registry.npmjs.org/has-unicode
npm http 200 https://registry.npmjs.org/wrappy
npm http 200 https://registry.npmjs.org/lodash.padleft
npm http GET https://registry.npmjs.org/tough-cookie/-/tough-cookie-1.1.0.tgz
npm http GET https://registry.npmjs.org/har-validator/-/har-validator-1.7.0.tgz
npm http GET https://registry.npmjs.org/lodash.padright/-/lodash.padright-3.1.1.tgz
npm http GET https://registry.npmjs.org/lodash.padleft/-/lodash.padleft-3.1.1.tgz
npm http 200 https://registry.npmjs.org/mime-types/-/mime-types-2.0.11.tgz
npm http GET https://registry.npmjs.org/brace-expansion
npm http 200 https://registry.npmjs.org/har-validator/-/har-validator-1.7.0.tgz
npm http 200 https://registry.npmjs.org/tough-cookie/-/tough-cookie-1.1.0.tgz
npm http 200 https://registry.npmjs.org/lodash.padleft/-/lodash.padleft-3.1.1.tgz
npm http 200 https://registry.npmjs.org/lodash.padright/-/lodash.padright-3.1.1.tgz
npm http 304 https://registry.npmjs.org/brace-expansion
npm http GET https://registry.npmjs.org/string_decoder
npm http GET https://registry.npmjs.org/core-util-is
npm http GET https://registry.npmjs.org/isarray/0.0.1
npm http GET https://registry.npmjs.org/lodash._basetostring
npm http 304 https://registry.npmjs.org/string_decoder
npm http GET https://registry.npmjs.org/lodash._createpadding
npm http 304 https://registry.npmjs.org/core-util-is
npm http 304 https://registry.npmjs.org/isarray/0.0.1
npm http GET https://registry.npmjs.org/balanced-match
npm http GET https://registry.npmjs.org/concat-map/0.0.1
npm http 304 https://registry.npmjs.org/lodash._createpadding
npm http 304 https://registry.npmjs.org/lodash._basetostring
npm http 304 https://registry.npmjs.org/balanced-match
npm http GET https://registry.npmjs.org/lodash.repeat
npm http 304 https://registry.npmjs.org/lodash.repeat
npm http 304 https://registry.npmjs.org/concat-map/0.0.1
npm http GET https://registry.npmjs.org/delayed-stream/0.0.5
npm http GET https://registry.npmjs.org/mime-db
npm http GET https://registry.npmjs.org/async
npm http GET https://registry.npmjs.org/asn1/0.1.11
npm http GET https://registry.npmjs.org/ctype/0.5.3
npm http GET https://registry.npmjs.org/assert-plus
npm http 200 https://registry.npmjs.org/delayed-stream/0.0.5
npm http GET https://registry.npmjs.org/delayed-stream/-/delayed-stream-0.0.5.tgz
npm http 304 https://registry.npmjs.org/assert-plus
npm http GET https://registry.npmjs.org/chalk
npm http GET https://registry.npmjs.org/is-my-json-valid
npm http GET https://registry.npmjs.org/commander
npm http GET https://registry.npmjs.org/bluebird
npm http 200 https://registry.npmjs.org/mime-db
npm http GET https://registry.npmjs.org/mime-db/-/mime-db-1.9.1.tgz
npm http 304 https://registry.npmjs.org/asn1/0.1.11
npm http 304 https://registry.npmjs.org/ctype/0.5.3
npm http 200 https://registry.npmjs.org/is-my-json-valid
npm http 200 https://registry.npmjs.org/async
npm http 200 https://registry.npmjs.org/delayed-stream/-/delayed-stream-0.0.5.tgz
npm http 200 https://registry.npmjs.org/commander
npm http GET https://registry.npmjs.org/commander/-/commander-2.8.1.tgz
npm http 200 https://registry.npmjs.org/chalk
npm http 200 https://registry.npmjs.org/mime-db/-/mime-db-1.9.1.tgz
npm http GET https://registry.npmjs.org/cryptiles
npm http GET https://registry.npmjs.org/sntp
npm http GET https://registry.npmjs.org/boom
npm http GET https://registry.npmjs.org/hoek
npm http 200 https://registry.npmjs.org/bluebird
npm http GET https://registry.npmjs.org/bluebird/-/bluebird-2.9.25.tgz
npm http 200 https://registry.npmjs.org/commander/-/commander-2.8.1.tgz
npm http 200 https://registry.npmjs.org/cryptiles
npm http 200 https://registry.npmjs.org/sntp
npm http 200 https://registry.npmjs.org/bluebird/-/bluebird-2.9.25.tgz
npm http 200 https://registry.npmjs.org/boom
npm http 200 https://registry.npmjs.org/hoek
npm http GET https://registry.npmjs.org/hoek/-/hoek-2.13.0.tgz
npm http 200 https://registry.npmjs.org/hoek/-/hoek-2.13.0.tgz
npm http GET https://registry.npmjs.org/escape-string-regexp
npm http GET https://registry.npmjs.org/ansi-styles
npm http GET https://registry.npmjs.org/has-ansi
npm http GET https://registry.npmjs.org/strip-ansi
npm http GET https://registry.npmjs.org/supports-color
npm http GET https://registry.npmjs.org/graceful-readlink
npm http GET https://registry.npmjs.org/generate-function
npm http GET https://registry.npmjs.org/generate-object-property
npm http GET https://registry.npmjs.org/xtend
npm http GET https://registry.npmjs.org/jsonpointer
npm http 200 https://registry.npmjs.org/escape-string-regexp
npm http 304 https://registry.npmjs.org/ansi-styles
npm http 304 https://registry.npmjs.org/has-ansi
npm http 304 https://registry.npmjs.org/strip-ansi
npm http 304 https://registry.npmjs.org/graceful-readlink
npm http 304 https://registry.npmjs.org/supports-color
npm http 304 https://registry.npmjs.org/generate-object-property
npm http 304 https://registry.npmjs.org/generate-function
npm http 200 https://registry.npmjs.org/xtend
npm http GET https://registry.npmjs.org/ansi-regex
npm http GET https://registry.npmjs.org/ansi-regex
npm http GET https://registry.npmjs.org/get-stdin
npm http 304 https://registry.npmjs.org/jsonpointer
npm http GET https://registry.npmjs.org/is-property
npm http 304 https://registry.npmjs.org/ansi-regex
npm http 304 https://registry.npmjs.org/get-stdin
npm http 304 https://registry.npmjs.org/ansi-regex
npm http 304 https://registry.npmjs.org/is-property
/bin/node-gyp -> /lib/node_modules/node-gyp/bin/node-gyp.js
npm WARN unmet dependency /lib/node_modules/block-stream requires inherits@'~2.0.0' but will load
npm WARN unmet dependency undefined,
npm WARN unmet dependency which is version undefined
npm WARN unmet dependency /lib/node_modules/fstream requires inherits@'~2.0.0' but will load
npm WARN unmet dependency undefined,
npm WARN unmet dependency which is version undefined
npm WARN unmet dependency /lib/node_modules/fstream-ignore requires inherits@'2' but will load
npm WARN unmet dependency undefined,
npm WARN unmet dependency which is version undefined
npm WARN unmet dependency /lib/node_modules/fstream-npm requires inherits@'2' but will load
npm WARN unmet dependency undefined,
npm WARN unmet dependency which is version undefined
npm WARN unmet dependency /lib/node_modules/glob requires inherits@'2' but will load
npm WARN unmet dependency undefined,
npm WARN unmet dependency which is version undefined
npm WARN unmet dependency /lib/node_modules/npmconf requires inherits@'~2.0.0' but will load
npm WARN unmet dependency undefined,
npm WARN unmet dependency which is version undefined
npm WARN unmet dependency /lib/node_modules/tar requires inherits@'2' but will load
npm WARN unmet dependency undefined,
npm WARN unmet dependency which is version undefined
node-gyp@1.0.3 /lib/node_modules/node-gyp
├── which@1.0.9
├── rimraf@2.3.3
├── osenv@0.1.0
├── graceful-fs@3.0.6
├── nopt@3.0.1 (abbrev@1.0.5)
├── fstream@1.0.4 (inherits@2.0.1)
├── semver@4.3.4
├── tar@1.0.3 (inherits@2.0.1, block-stream@0.0.7)
├── mkdirp@0.5.0 (minimist@0.0.8)
├── minimatch@1.0.0 (sigmund@1.0.0, lru-cache@2.6.2)
├── glob@4.5.3 (inherits@2.0.1, once@1.3.2, inflight@1.0.4, minimatch@2.0.7)
├── npmlog@1.2.0 (ansi@0.3.0, are-we-there-yet@1.0.4, gauge@1.2.0)
└── request@2.55.0 (caseless@0.9.0, json-stringify-safe@5.0.0, aws-sign2@0.5.0, forever-agent@0.6.1, stringstream@0.0.4, oauth-sign@0.6.0, tunnel-agent@0.4.0, isstream@0.1.2, node-uuid@1.4.3, qs@2.4.1, bl@0.9.4, form-data@0.2.0, http-signature@0.10.1, tough-cookie@1.1.0, combined-stream@0.0.7, mime-types@2.0.11, hawk@2.3.1, har-validator@1.7.0)
git submodule update --init --recursive
Submodule 'source/themes' (http://github.com/haroopress/haroopress-themes.git) registered for path 'source/themes'
Cloning into 'source/themes'...
remote: Counting objects: 2071, done.
remote: Total 2071 (delta 0), reused 0 (delta 0), pack-reused 2071
Receiving objects: 100% (2071/2071), 20.07 MiB | 247.00 KiB/s, done.
Resolving deltas: 100% (1117/1117), done.
Checking connectivity... done.
Submodule path 'source/themes': checked out '0b858f95bee3b39e48b47192b19ec8a76b103b22'
cd ./node_modules/robotskirt;node-gyp rebuild
gyp info it worked if it ends with ok
gyp info using node-gyp@1.0.3
gyp info using node@0.10.36 | linux | x64
gyp info spawn python
gyp info spawn args [ '/usr/lib/node_modules/node-gyp/gyp/gyp_main.py',
gyp info spawn args   'binding.gyp',
gyp info spawn args   '-f',
gyp info spawn args   'make',
gyp info spawn args   '-I',
gyp info spawn args   '/home/juansal/haroopress/haroopress_test/node_modules/robotskirt/build/config.gypi',
gyp info spawn args   '-I',
gyp info spawn args   '/usr/lib/node_modules/node-gyp/addon.gypi',
gyp info spawn args   '-I',
gyp info spawn args   '/root/.node-gyp/0.10.36/common.gypi',
gyp info spawn args   '-Dlibrary=shared_library',
gyp info spawn args   '-Dvisibility=default',
gyp info spawn args   '-Dnode_root_dir=/root/.node-gyp/0.10.36',
gyp info spawn args   '-Dmodule_root_dir=/home/juansal/haroopress/haroopress_test/node_modules/robotskirt',
gyp info spawn args   '--depth=.',
gyp info spawn args   '--no-parallel',
gyp info spawn args   '--generator-output',
gyp info spawn args   'build',
gyp info spawn args   '-Goutput_dir=.' ]
gyp info spawn make
gyp info spawn args [ 'BUILDTYPE=Release', '-C', 'build' ]
make[1]: se ingresa al directorio `/home/juansal/haroopress/haroopress_test/node_modules/robotskirt/build'
  CC(target) Release/obj.target/sundown/src/autolink.o
  CC(target) Release/obj.target/sundown/src/buffer.o
  CC(target) Release/obj.target/sundown/src/houdini_href_e.o
  CC(target) Release/obj.target/sundown/src/houdini_html_e.o
  CC(target) Release/obj.target/sundown/src/houdini_html_u.o
  CC(target) Release/obj.target/sundown/src/houdini_js_e.o
  CC(target) Release/obj.target/sundown/src/houdini_js_u.o
  CC(target) Release/obj.target/sundown/src/houdini_uri_e.o
  CC(target) Release/obj.target/sundown/src/houdini_uri_u.o
  CC(target) Release/obj.target/sundown/src/houdini_xml_e.o
  CC(target) Release/obj.target/sundown/src/html.o
  CC(target) Release/obj.target/sundown/src/html_smartypants.o
  CC(target) Release/obj.target/sundown/src/markdown.o
  CC(target) Release/obj.target/sundown/src/stack.o
  AR(target) Release/obj.target/sundown.a
  COPY Release/sundown.a
  CXX(target) Release/obj.target/robotskirt/src/robotskirt.o
  SOLINK_MODULE(target) Release/obj.target/robotskirt.node
  SOLINK_MODULE(target) Release/obj.target/robotskirt.node: Finished
  COPY Release/robotskirt.node
make[1]: se sale del directorio `/home/juansal/haroopress/haroopress_test/node_modules/robotskirt/build'
gyp info ok 
cd ./node_modules/locally/;npm install
========================================
= configurate haroopress
========================================
./bin/setup.js

haroo> Insert your site title (*) "My Haoopress Blog"
 > Haroopress Test
haroo> Insert your site description (*) "My Development diary, I love node.js & javascript"
 > Test de Haroopress sobre github
haroo> Insert site url (*) "http://www.myblog.com"
 > http://juaalta.github.io
haroo> Insert you full name (*) "Rhio Kim (sync to source/data/authors/Rhio Kim.markdown)"
 > Mi nombre
haroo> Insert you gravatar email address (*) "abc123@gmail.com"
 > correo
haroo> Insert you site meta information (*) "javascript, css3, html5"
 > javascript, css3, html5
http://juaalta.github.io Meta Information
-----------------------------------------------
{
    "version": "0.9.2",
    "defaultTitle": "Haroopress Test",
    "description": "Test de Haroopress sobre github",
    "siteUrl": "http://juaalta.github.io",
    "author": "Juansal",
    "email": "juaalta@gmail.com",
    "keywords": [
        "javascript",
        "css3",
        "html5"
    ]
}
haroo> Save? [y/n] :           y
========================================
= clear public & deployment directories
========================================
./bin/clear.js
haroo> clear to deploy directory¶
haroo> clear to public directory
========================================
= setup repository for deployment
========================================
cd ./bin/;./gh-pages.js
haroo> Enter the read/write repository for your haroopress site 
"https://github.com/[github-id]/[github-id].github.io.git"
 > 
haroo> git remote -v¶
origin    https://github.com/rhiokim/haroopress.git (fetch)
origin    https://github.com/rhiokim/haroopress.git (push)

haroo> Start setting github pages branch ¶
Initialized empty Git repository in /home/juansal/haroopress/haroopress_test/_deploy/.git/

haroo> Completed git repository initialize ¶

haroo> Repository remote's name origin -> haroopress ¶
haroo> Git remote add to origin ¶

haroo> Added remote https://github.com/juaalta/juaalta.github.io.git as origin ¶

haroo> Set origin as default remote ¶

haroo> Created inex.html ¶

haroo> git add . ¶

haroo> Copy temp commiter ¶

haroo> git commit ¶

haroo> Remove temp commiter ¶

haroo> git remote add origin ¶
========================================
= create default data set
========================================
./bin/init.js
haroo> created initial data
haroo> site data initialized
clear
 [3;J
cat ./lib/haroopress/QUICK.markdown
# Quick guide
\`\`\`
$ make gen       // 정적 페이지 생성
$ make preview   // 미리보기
$ make new-post  // 새로운 글 작성
$ make new-page  // 새로운 페이지 작성
$ make new-slide // 새로운 웹 슬라이드 작성
\`\`\`
# Read more
* 하루프레스 공식 : http://haroopress.com
* 새로운 포스트 작성 : http://haroopress.com/post/haroopress-posting-guide/
* 블로그 퍼블리싱 : http://haroopress.com/post/haroopress-deploy-to-github/

Copyright © haroopress / Contact to rhio.kim@gmail.com
Source http://github.com/rhiokim/haroopress
Issue https://github.com/rhiokim/haroopress/issues
Si el comando anterior no se ejecuta con sudo delante se obtiene el siguiente error:
npm install -g node-gyp
npm http GET https://registry.npmjs.org/node-gyp
npm http 304 https://registry.npmjs.org/node-gyp
npm ERR! error rolling back Error: EACCES, unlink '/bin/node-gyp'
npm ERR! error rolling back  node-gyp@1.0.3 { [Error: EACCES, unlink '/bin/node-gyp'] errno: 3, code: 'EACCES', path: '/bin/node-gyp' }
npm ERR! Error: EACCES, unlink '/bin/node-gyp'
npm ERR!  { [Error: EACCES, unlink '/bin/node-gyp'] errno: 3, code: 'EACCES', path: '/bin/node-gyp' }
npm ERR! 
npm ERR! Please try running this command again as root/Administrator.

npm ERR! System Linux 3.19.4-100.fc20.x86_64
npm ERR! command "node" "/bin/npm" "install" "-g" "node-gyp"
npm ERR! cwd /home/juansal/haroopress/haroopress_test
npm ERR! node -v v0.10.36
npm ERR! npm -v 1.3.6
npm ERR! path /bin/node-gyp
npm ERR! code EACCES
npm ERR! errno 3
npm ERR! stack Error: EACCES, unlink '/bin/node-gyp'
npm ERR! 
npm ERR! Additional logging details can be found in:
npm ERR!     /home/juansal/haroopress/haroopress_test/npm-debug.log
npm ERR! not ok code 0
make: *** [initialize] Error 3

Uso de haroopress

Comandos de previsualización y publicación

Establecer el repositorio GitHub para desplegar la web

Este comando no es preciso lanzarlo, si en el paso anterior ha sido configurado el repositorio de github.
make gh-pages
La ejecución de este comando da como resultado:
========================================
= clear public & deployment directories
========================================
./bin/clear.js
haroo> clear to deploy directory¶
haroo> clear to public directory
========================================
= setup repository for deployment
========================================
cd ./bin/;./gh-pages.js
haroo> Enter the read/write repository for your haroopress site 
"https://github.com/[github-id]/[github-id].github.io.git"
 > https://github.com/juaalta/juaalta.github.io.git
haroo> git remote -v¶
origin    https://github.com/juaalta/juaalta.github.io.git (fetch)
origin    https://github.com/juaalta/juaalta.github.io.git (push)
Durante la ejecución del comando se nos pide la ruta de github en la que se subirá el repositorio.

Generar las páginas estáticas

make gen
La ejecución de este comando da como resultado:
========================================
= clear public & deployment directories
========================================
./bin/clear.js
haroo> clear to deploy directory¶
haroo> clear to public directory
========================================
= generate to static page
========================================
./bin/gen.js
haroo> cp -R /home/juansal/haroopress/haroopress_test/source/themes/basic/public/* /home/juansal/haroopress/haroopress_test/_public
haroo> export rss.xml ¶
haroo> /home/juansal/haroopress/haroopress_test/_public/rss.xml
haroo> export 404.html ¶
haroo> /home/juansal/haroopress/haroopress_test/_public/404.html
haroo> export index.html ¶
haroo> /home/juansal/haroopress/haroopress_test/_public/index.html
haroo> export archives.html ¶
haroo> /home/juansal/haroopress/haroopress_test/_public/archives/index.html
haroo> export article.html ¶
haroo> /home/juansal/haroopress/haroopress_test/_public/post/welcome-to-haroopress/index.html
haroo> /home/juansal/haroopress/haroopress_test/_public/post/presentacion/index.html
haroo> export slides ¶
haroo> /home/juansal/haroopress/haroopress_test/_public/slides/hello-world/index.html
haroo> export slides.html ¶
haroo> /home/juansal/haroopress/haroopress_test/_public/slides/index.html
haroo> export categories.html ¶
haroo> /home/juansal/haroopress/haroopress_test/_public/category/index.html
haroo> export category.html ¶
haroo> export authors.html ¶
haroo> /home/juansal/haroopress/haroopress_test/_public/authors/index.html
haroo> export author.html ¶
haroo> /home/juansal/haroopress/haroopress_test/_public/authors/Juansal/index.html
haroo> /home/juansal/haroopress/haroopress_test/_public/authors/haroopress/index.html
haroo> export pages.html ¶
=====================================
==       content statistics        ==
=====================================
== article | publish(2) | draft(1) ==
== page    | publish(0) | draft(1) ==
== slide   | publish(1) | draft(0) ==
=====================================
mkdir -p ./_public/slides/@asserts
cp -R ./lib/shower/themes ./_public/slides/@asserts
cp -R ./lib/shower/scripts ./_public/slides/@asserts
cp -R ./lib/bootstrap/* ./_public

Previsualizar en local la web generada

make preview
La ejecución de este comando da como resultado:
========================================
= clear public & deployment directories
========================================
./bin/clear.js
haroo> clear to deploy directory¶
haroo> clear to public directory
========================================
= generate to static page
========================================
./bin/gen.js
haroo> cp -R /home/juansal/haroopress/haroopress_test/source/themes/basic/public/* /home/juansal/haroopress/haroopress_test/_public
haroo> export rss.xml ¶
haroo> /home/juansal/haroopress/haroopress_test/_public/rss.xml
haroo> export 404.html ¶
haroo> /home/juansal/haroopress/haroopress_test/_public/404.html
haroo> export index.html ¶
haroo> /home/juansal/haroopress/haroopress_test/_public/index.html
haroo> export archives.html ¶
haroo> /home/juansal/haroopress/haroopress_test/_public/archives/index.html
haroo> export article.html ¶
haroo> /home/juansal/haroopress/haroopress_test/_public/post/welcome-to-haroopress/index.html
haroo> /home/juansal/haroopress/haroopress_test/_public/post/presentacion/index.html
haroo> export slides ¶
haroo> /home/juansal/haroopress/haroopress_test/_public/slides/hello-world/index.html
haroo> export slides.html ¶
haroo> /home/juansal/haroopress/haroopress_test/_public/slides/index.html
haroo> export categories.html ¶
haroo> /home/juansal/haroopress/haroopress_test/_public/category/index.html
haroo> export category.html ¶
haroo> export authors.html ¶
haroo> /home/juansal/haroopress/haroopress_test/_public/authors/index.html
haroo> export author.html ¶
haroo> /home/juansal/haroopress/haroopress_test/_public/authors/Juansal/index.html
haroo> /home/juansal/haroopress/haroopress_test/_public/authors/haroopress/index.html
haroo> export pages.html ¶
=====================================
==       content statistics        ==
=====================================
== article | publish(2) | draft(1) ==
== page    | publish(0) | draft(1) ==
== slide   | publish(1) | draft(0) ==
=====================================
mkdir -p ./_public/slides/@asserts
cp -R ./lib/shower/themes ./_public/slides/@asserts
cp -R ./lib/shower/scripts ./_public/slides/@asserts
cp -R ./lib/bootstrap/* ./_public
========================================
= preview static page
========================================
./bin/preview.js
haroo> Start server at http://localhost:8081 ¶
Do you want check on the browser? [y(es)/n] : n
haroo> You can check your site on the web browser. ( Stop server : ^C )
Para finalizar la previsualización se ha de pulsar ctrl+c

Pulicar la web en github

make deploy
La ejecución de este comando da como resultado:
lear public & deployment directories
========================================
./bin/clear.js
haroo> clear to deploy directory¶
haroo> clear to public directory
========================================
= generate to static page
========================================
./bin/gen.js
haroo> cp -R /home/juansal/haroopress/haroopress_test/source/themes/basic/public/* /home/juansal/haroopress/haroopress_test/_public
haroo> export rss.xml ¶
haroo> /home/juansal/haroopress/haroopress_test/_public/rss.xml
haroo> export 404.html ¶
haroo> /home/juansal/haroopress/haroopress_test/_public/404.html
haroo> export index.html ¶
haroo> /home/juansal/haroopress/haroopress_test/_public/index.html
haroo> export archives.html ¶
haroo> /home/juansal/haroopress/haroopress_test/_public/archives/index.html
haroo> export article.html ¶
haroo> /home/juansal/haroopress/haroopress_test/_public/post/welcome-to-haroopress/index.html
haroo> /home/juansal/haroopress/haroopress_test/_public/post/presentacion/index.html
haroo> export slides ¶
haroo> /home/juansal/haroopress/haroopress_test/_public/slides/hello-world/index.html
haroo> export slides.html ¶
haroo> /home/juansal/haroopress/haroopress_test/_public/slides/index.html
haroo> export categories.html ¶
haroo> /home/juansal/haroopress/haroopress_test/_public/category/index.html
haroo> export category.html ¶
haroo> export authors.html ¶
haroo> /home/juansal/haroopress/haroopress_test/_public/authors/index.html
haroo> export author.html ¶
haroo> /home/juansal/haroopress/haroopress_test/_public/authors/Juansal/index.html
haroo> /home/juansal/haroopress/haroopress_test/_public/authors/haroopress/index.html
haroo> export pages.html ¶
=====================================
==       content statistics        ==
=====================================
== article | publish(2) | draft(1) ==
== page    | publish(0) | draft(1) ==
== slide   | publish(1) | draft(0) ==
=====================================
mkdir -p ./_public/slides/@asserts
cp -R ./lib/shower/themes ./_public/slides/@asserts
cp -R ./lib/shower/scripts ./_public/slides/@asserts
cp -R ./lib/bootstrap/* ./_public
========================================
= deploy to github
========================================
cd ./bin;./deploy.js ""
haroo> Resources copy to Deploy directory
haroo> git add .¶

haroo> git add -u¶

haroo> git commit -m ¶
[master c75a4b7] Site updated at Fri May 08 2015 01:21:18 GMT+0200 (CEST)
 1 file changed, 1 insertion(+), 1 deletion(-)

haroo> git push origin master --force¶

haroo> completed http://juaalta.github.io
haroo> open http://juaalta.github.io ? [y/n]          y

Comandos de generación de contenido

Crear un artículo

make new-post
La ejecución del comando da como resultado:
cd ./bin;./new-post.js
haroo> Input article title : Prueva 1
haroo> Input article category : test
haroo> Input article tag (e.g tag1, tag2, tag3) : test
haroo> write post -> /home/juansal/haroopress/haroopress_test/source/data/articles/prueva-1/index.markdown
haroo> article's image path /home/juansal/haroopress/haroopress_test/source/data/articles/prueva-1/@img
Para modificar el artículo se ha de modificar el fichero que se indica en la línea write post ->, en nuestro caso es /home/juansal/haroopress/haroopress_test/source/data/articles/prueva-1/index.markdown.
Las imágenes a añadir al artículo han de guardarse dentro de la carpeta que se indica en la línea article's image path, en nuestro caso es /home/juansal/haroopress/haroopress_test/source/data/articles/prueva-1/@img.
El contenido de un artículo vacío es:
{
    "title": "Prueva 1",
    "author": "Juansal",
    "date": "2015-05-07T23:06:28.322Z",
    "categories": [
        "test"
    ],
    "tags": [
        "test"
    ],
    "acceptComment": true,
    "acceptTrackback": true,
    "published": "2015-05-07T23:06:28.322Z",
    "status": "draft",
    "important": false,
    "advanced": {}
}

write here!
Nuestro artículo en Markdown ha de empezar en la línea en la que se encuentra la frase write here! (esta frase puede ser borrada, sólo indica el inicio del código del artículo). La información anterior a esta frase es usada por Haroopres.
Nota importante:
Mientras la variable status contenga el valor draft, este artículo no se publicará. Para que se publique se ha de cambiar el valor a publish.

Crear una página

make new-page
La ejecución del comando da como resultado:
cd ./bin;./new-page.js
haroo> Enter page title : Pagina test 1
haroo> Enter page category (e.g cate1, cate2, cate3 ) : test
haroo> Enter page tag (e.g tag1, tag2, tag3) : test
haroo> created -> /home/juansal/haroopress/haroopress_test/source/data/pages/pagina-test-1/index.markdown
haroo> page's image path /home/juansal/haroopress/haroopress_test/source/data/pages/pagina-test-1/@img
Para modificar la página se ha de modificar el fichero que se indica en la línea created ->, en nuestro caso es /home/juansal/haroopress/haroopress_test/source/data/pages/pagina-test-1/index.markdown.
Las imágenes a añadir a la página han de guardarse dentro de la carpeta que se indica en la línea page's image path, en nuestro caso es /home/juansal/haroopress/haroopress_test/source/data/pages/pagina-test-1/@img.
El contenido de una página vacía es:
{
    "title": "Pagina test 1",
    "author": "Juansal",
    "date": "2015-05-07T23:28:10.571Z",
    "categories": [
        "test"
    ],
    "tags": [
        "test"
    ],
    "acceptComment": true,
    "acceptTrackback": true,
    "published": "2015-05-07T23:28:10.571Z",
    "status": "publish",
    "important": false,
    "advanced": {
        "layout": "",
        "display": ""
    }
}

content here!
Nuestro contenido de la página en Markdown ha de empezar en la línea en la que se encuentra la frase content here! (esta frase puede ser borrada, sólo indica el inicio del código del artículo). La información anterior a esta frase es usada por Haroopres.
Nota importante:
Mientras la variable status contenga el valor draft, este artículo no se publicará. Para que se publique se ha de cambiar el valor a publish.

Crear un pase de diapositivas

make new-slide
La ejecución del comando da como resultado:
cd ./bin;./new-slide.js
haroo> Input slide title : Slide Test 1
haroo> Input slide category : test
haroo> Input slide tag (e.g tag1, tag2, tag3) : test
haroo> write slide -> /home/juansal/haroopress/haroopress_test/source/data/slides/slide-test-1/index.markdown
haroo> slide's image path /home/juansal/haroopress/haroopress_test/source/data/slides/slide-test-1/@img
Para modificar la presentación se ha de modificar el fichero que se indica en la línea write slide ->, en nuestro caso es /home/juansal/haroopress/haroopress_test/source/data/slides/slide-test-1/index.markdown.
Las imágenes a añadir a la presentación han de guardarse dentro de la carpeta que se indica en la línea slide's image path, en nuestro caso es /home/juansal/haroopress/haroopress_test/source/data/slides/slide-test-1/@img.
El contenido de una presentación vacía es:
{
    "title": "Slide Test 1",
    "author": "Juansal",
    "date": "2015-05-07T23:32:29.627Z",
    "categories": [
        "test"
    ],
    "tags": [
        "test"
    ],
    "acceptComment": true,
    "acceptTrackback": true,
    "published": "2015-05-07T23:32:29.627Z",
    "status": "draft",
    "important": false,
    "advanced": {
        "layout": "slide",
        "displayCover": true
    }
}

## First Slide

Slide Content Here

Slide Seperator is five hypen (=)

![cover](../_asserts/pictures/cover.jpg)

=====

## Second Slide Title

Slide Content Here

=====

## Third Slide Title

* ul
    - li
    - li
* ul
    - li

=====

## Forth Slide Title

` ` `
var foo = 'bar';
//code here
` ` `
Nuestro contenido de la presentación en Markdown ha de empezar en la línea en la que se encuentra la frase ## First Slide (esta frase puede ser borrada, sólo indica el inicio del código del artículo). La información anterior a esta frase es usada por Haroopres.
Nota importante:
Mientras la variable status contenga el valor draft, este artículo no se publicará. Para que se publique se ha de cambiar el valor a publish.
​

Comentarios

Publicar un comentario

Entradas populares de este blog

Material density detection system used to create wet wipes with Arduino 2/2

Imagen
Construction of the final prototype Components used The components used have been, per module: Density Bar 1 - Arduino Pro Mini 5v 4 - LDRs 4 - Resistors 1k 2 - PCB Terminal Blocks Communication bar 1 - Arduino Pro Mini 5v 1 - LM2596s DC-DC step down power supply module 2 - PCB Terminal Blocks 1 - Voltage regulator TIP220 1 - Heat Sink for TIP220 1 - Rectangular LED 6W 630lm 6500K COB 170 x 15 mm. Industruino 1 - Industruino PROTO kit 1 - Relay module Keyes_SR1 Arduino with screen 1 - Arduino UNO R3 1 - 16x2 Character LCD module with I2C 3 - Resistors 10k 2 - Resistors 220 1 - LED Red 1 - LED Green 3 - Buttons 1 - Relay module Keyes_SR1 Assembly of the circuit The Fritzing scheme is as follows: Density bar Circuit that manages the density bar This circuit is responsible for obtaining the measurements and send notifications to the communications bar for redirection. Communication bar Circuit that manages the c...
Leer más

Sistema de detección de la densidad del material usado para crear las toallitas húmedas con Arduino 2/2

Imagen
Construcción del prototipo final Componentes usados Los componentes usados han sido, por módulo: Barra de densidad 1 - Arduino Pro Mini 5v 4 - LDRs 4 - Resistencias 1k 2 - Bloques Terminales para PCB Barra de comunicaciones 1 - Arduino Pro Mini 5v 1 - Reductor voltaje LM2596s 2 - Bloques Terminales para PCB 1 - Regulador de voltaje TIP220 1 - Disipador TIP220 1 - LED de 6W 630lm 6500K COB de 170 x 15 mm. Industruino 1 - Industruino PROTO kit 1 - Modulo relé Keyes_SR1 Arduino con pantalla 1 - Arduino UNO R3 1 - Pantalla LCD de 16x2 con I2C 3 - Resistencias 10k 2 - Resistencias 220 1 - LED Rojo 1 - LED Verde 3 - Botones 1 - Modulo relé Keyes_SR1 Montaje del circuito El esquema en Fritzing es el siguiente: Barra de densidad Circuito que gestiona la barra de densidad Este circuito se encarga de obtener las mediciones y enviar notificaciones a la barra de comunicaciones para que las redirija. Barra de comunicaciones Circui...
Leer más

Sistema de detección de la densidad del material usado para crear las toallitas húmedas con Arduino 1/2

Imagen
Barras montadas dentro del maletín de demo Barras montadas en el banco de pruebas Introducción Esta aventura comenzó cuando mi amigo Fran vino a buscarme para contarme la necesidad que había detectado en una empresa y quería que le echara una mano para llevarla a buen puerto. Aunque al final el proyecto no se aplicó en la empresa, decidimos terminarlo, habíamos dedicado demasiado tiempo en él como para no hacerlo. El proyecto consistía en crear un sistema de detección de la densidad de un material para detectar si este cumplía con la calidad esperada. En caso de no cumplirla se debía de activar un relé. La solución que se eligiera debía de aplicarse a 9 máquinas, ser capaz de estar funcionando las 24 horas del día y realizar las tareas a la velocidad de funcionamiento de la máquina. El producto a analizar consistía en las bobinas de material usado para crear las toallitas húmedas. Los casos que debían producir la activación del relé eran los siguientes: Den...
Leer más